Whut and Olimex LPC11xx Dev Board LED, Key, 7 segment LED tested OK

All the following four tested OK

// testOlimexLedKey01(); 
// testWhutLedKey01();
// testWhut7segmentLed01();
// testOlimex7segmentLed01();

.END


// ***********************************************************************
// Program  - Fong EKG v5.0
// Function - Olimex EKG Board Evaluation
// Author   - TL Fong
// Build    - 2013.10.15.01
// Date     - 2013oct15hkt1106
// Hardware - Olimex/CooCox/MagicBlue/WHUT/Somy LPC1114/C14/301
//            Olimex EKG board (SHIELD-EKG/EMG Rev B, Bulgaria 2011)
// Software - GCC ARM 4.7, CoIDE 1.7.4,  CoLinkEx 1.1, Flash Magic v7.51
// ***********************************************************************

#include "test050.h" // main tests

// ***********************************************************************
// Main Function
// ***********************************************************************

int main()
{
// *** Completed tests ***
// testOlimexLedKey01(); 
// testWhutLedKey01();
// testWhut7segmentLed01();
testOlimex7segmentLed01();

// *** End of tests ***
return 0;
}

// ***********************************************************************
// End
// ***********************************************************************



// ***********************************************************************
// test050.h 2013oct15hkt1109
// ***********************************************************************

#include "led050.h"
#include "key050.h"
#include "olimex050.h"

void testOlimexLedKey01() // tested OK 2013oct13
{
// *** For all mcu boards - setup GPIO pin as out and toggle ***
setupGpioPinOutputLow050(PortPinArrayP09); // setup GPIO pin as ooutput
blinkLed0501(PortPinArrayP09); // blink led

// *** Olimex test only - setup I/O pins for testing ***
setupOlimexGpio050(); // setup Olimex GPIO pins as output and input

// *** Olimex test only - blink single LED and run all LEDs***
blinkOlimexLed(LED_7, ON_ONE_FIFTH_SECOND, OFF_ONE_FIFTH_SECOND, REPEAT_6_TIMES); // blink one Led
runOlimexLeds();  // sequentially blink all 8 Leds

// *** Olimex test only - echo key by led ***
echoOlimexKeyByLed(KEY_1, LED_1); // echo Olimex key by led
echoOlimexKeyByLed(KEY_2, LED_2); // echo Olimex key by led
echoOlimexKeyByLed(KEY_1, LED_3); // echo Olimex key by led

// *** For all mcu boards, given mcu board struct, echo key by led ***
echoKeyByLed0504(OlimexLpc1114DevBoardStruct, KEY_1, LED_5); // given mcuboard struct, echo key by led
}

void testWhutLedKey01() // tested OK 2013oct14
{
// *** For all mcu boards - setup GPIO pin as out and toggle ***
setupGpioPinOutputLow050(PortPinArrayP108); // setup LED1 pin
blinkLed0501(PortPinArrayP108); // blink LED1

// *** Whut only - setup I/O pins for testing ***
setupWhutGpio050(); // setup Olimex GPIO pins as output and input

// *** Whut only - blink single LED and run all LEDs***
blinkWhutLed(LED_1, ON_ONE_FIFTH_SECOND, OFF_ONE_FIFTH_SECOND, REPEAT_6_TIMES); // blink one Led
runWhutLeds();  // sequentially blink all 8 Leds

// *** Whut only - echo key by led ***
echoWhutKeyByLed(KEY_1, LED_1); // echo key by led
echoWhutKeyByLed(KEY_2, LED_2); // echo key by led
echoWhutKeyByLed(KEY_1, LED_3); // echo key by led

// *** For all mcu boards, given mcu board struct, echo key by led ***
echoKeyByLed0505(WhutLpc11c14DevBoardStruct, KEY_1, LED_2); // given mcuboard struct, echo key by led
}

void testWhut7segmentLed01()
{
    // *** system self diagnostic test - blink LED P108 ***
setupGpioPinOutputLow050(PortPinArrayP108); // setup LED1 pin
blinkLed0501(PortPinArrayP108); // blink LED1

// *** Testing 7 segment LED ***
displayAllDigits050(WhutBoardSevenSegmentLedPortPinArrayPointerArray, MAX_WHUT_7_SEG_LED_PIN_NUMBER);
}

void testOlimex7segmentLed01() //
{
    // *** system self diagnostic test - blink LED P09 ***
setupGpioPinOutputLow050(PortPinArrayP09); // setup GPIO pin as output
blinkLed0501(PortPinArrayP09); // blink led

// *** Testing 7 segment LED ***
displayAllDigits050(OlimexBoardSevenSegmentLedPortPinArrayPointerArray, MAX_OLIMEX_7_SEG_LED_PIN_NUMBER);
}

// ***********************************************************************
// End
// ***********************************************************************



// ***********************************************************************
// led050.h 2013oct15hkt1110
// ***********************************************************************

#include "config050.h"
#include "gpio050.h"
#include "timer050.h"

void blinkOneLed050(portPinArray ledPortPinArrayPointer, \
                    int onTime, int offTime, int blinkCount)
{
int count;
for (count = 0; count < blinkCount; count++)
  {
   setGpioDataPinLow01(ledPortPinArrayPointer);
   delayTenthSecond(onTime);
   setGpioDataPinHigh01(ledPortPinArrayPointer);
   delayTenthSecond(offTime);
  }
}

void blinkOneLed0501(portPinArrayPointerArray portPinArrayPointerArray, \
                     deviceNumber ledNumber, int onTime, int offTime, int blinkCount)
{
int count = 0;
portPinArray *ledPortPinArrayPointer;

ledPortPinArrayPointer = portPinArrayPointerArray[ledNumber - 1];

blinkOneLed050(ledPortPinArrayPointer, onTime, offTime, blinkCount);
}

void blinkAllLeds050(portPinArrayPointerArray ledPortPinArrayPointerArray, \
            int maxLedPinNumber, int onTime, int offTime, int repeatCount)
{
int ledNumber;

    for (ledNumber = 1; ledNumber < (maxLedPinNumber + 1); ledNumber++ )
    {
    blinkOneLed0501(ledPortPinArrayPointerArray, ledNumber, \
               onTime, offTime, repeatCount);
    }
}

void runOlimexLeds050(portPinArrayPointerArray ledPortPinArrayPointerArray, \
             int maxLedPinNumber, int onTime, int offTime, \
             int blinkCount, int sequenceCount)
{
setupAllGpioPinsOutputLow050(ledPortPinArrayPointerArray, maxLedPinNumber);

delayTime(ONE_HALF_SECOND);

int count;
for (count = 0; count < sequenceCount; count++)
{
blinkAllLeds050(ledPortPinArrayPointerArray, maxLedPinNumber, onTime, offTime, blinkCount);
}
}

void blinkLed0501(portPinArray ledPortPinArray)
{
// setupGpioPinOutputLow050(ledPortPinArray);

blinkOneLed050(ledPortPinArray, ON_ONE_HALF_SECOND, OFF_ONE_HALF_SECOND, \
     REPEAT_2_TIMES);
}

// *** Olimex only ***

void blinkOlimexLed(int ledNumber, int onTime, int offTime, int blinkCount)
{
blinkOneLed0501(OlimexBoardLedPortPinArrayPointerArray, \
                    ledNumber, onTime, offTime, blinkCount);
}

void runOlimexLeds()
{
runOlimexLeds050(OlimexBoardLedPortPinArrayPointerArray, MAX_OLIMEX_LED_PIN_NUMBER, \
        ON_ONE_FIFTH_SECOND, OFF_ONE_FIFTH_SECOND, BLINK_1_TIME, \
        SEQUENCE_2_TIMES);
}

void echoOlimexKeyByLed(int keyNumber, int ledNUmber)
{
setupAllGpioPinsOutputLow050(OlimexBoardLedPortPinArrayPointerArray, MAX_OLIMEX_LED_PIN_NUMBER);
setupAllGpioPinsInput050(OlimexBoardKeyPortPinArrayPointerArray,  MAX_OLIMEX_KEY_PIN_NUMBER);

echoKeyByLed050(OlimexBoardKeyPortPinArrayPointerArray, OlimexBoardLedPortPinArrayPointerArray, \
       keyNumber, ledNUmber);
}

// *** Whut only ***

void blinkWhutLed(int ledNumber, int onTime, int offTime, int blinkCount)
{
blinkOneLed0501(WhutBoardLedPortPinArrayPointerArray, \
                    ledNumber, onTime, offTime, blinkCount);
}

void runWhutLeds()
{
runOlimexLeds050(WhutBoardLedPortPinArrayPointerArray, MAX_WHUT_LED_PIN_NUMBER, \
        ON_ONE_FIFTH_SECOND, OFF_ONE_FIFTH_SECOND, BLINK_1_TIME, \
        SEQUENCE_2_TIMES);
}

// *** 7 Segment LED ***

void displayAllDigits050(portPinArrayPointerArray sevenSegmentLedPortPinArrayPointerArray, int maxSevenSegmentPinNumber)
{
initializeAllOutputPins(sevenSegmentLedPortPinArrayPointerArray, maxSevenSegmentPinNumber );

delayTime(ONE_SECOND);

displayAllDigits0501(sevenSegmentLedPortPinArrayPointerArray);

displayDigitBlank(sevenSegmentLedPortPinArrayPointerArray);
}

void displayAllDigits0501(portPinArrayPointerArray sevenSegmentLedPortPinArrayPointerArray)
{
int digitNumber;

for (digitNumber = 0; digitNumber < 10; digitNumber++)
    {
displayDigit0502(sevenSegmentLedPortPinArrayPointerArray, digitNumber);
delayTime(ONE_HALF_SECOND);
    }
}

void displayDigit0502(portPinArrayPointerArray sevenSegmentPortPinArrayPointerArray, \
  int digitNumber) // display 1 digit
{
portPinArray *portPinArrayPointerClock; // GPIO pin for clock
portPinArray *portPinArrayPointerData;  // GPIO pin for data
portPinArray *portPinArrayPointerLatch; // GPIO pin for latch

portPinArrayPointerClock = sevenSegmentPortPinArrayPointerArray[SCLK_INDEX];
portPinArrayPointerData  = sevenSegmentPortPinArrayPointerArray[DIN_INDEX];
portPinArrayPointerLatch = sevenSegmentPortPinArrayPointerArray[LATCH_INDEX];

setGpioDataPinLow01(portPinArrayPointerLatch); // set latch low
setGpioDataPinLow01(portPinArrayPointerClock); // set clock pin low
loadSevenSegmentDataBits(portPinArrayPointerData, portPinArrayPointerClock, digitNumber); // load segment bits
setGpioDataPinHigh01(portPinArrayPointerLatch); // set latch pin high
}

void sendPositiveGoingPulse(portPinArray *portPinArrayPointer)
{
setGpioDataPinHigh01(portPinArrayPointer);
setGpioDataPinLow01(portPinArrayPointer);
}

void loadSevenSegmentDataBits(portPinArray *portPinArrayPointerData, \
portPinArray *portPinArrayPointerClock, int alphaNumbericCharacter)
{
int segmentNumber;
int segmentBit;
int segmentByte, segmentByte1;

int Segment0 = 0b11111100; // 7 sements bits & decimal point pattern of digit 0
int Segment1 = 0b01100000;
int Segment2 = 0b11011010;
int Segment3 = 0b11110010;
int Segment4 = 0b01100110;
int Segment5 = 0b10110110;
int Segment6 = 0b10111110;
int Segment7 = 0b11100000;
int Segment8 = 0b11111110;
int Segment9 = 0b11110110; // digit 9
int AllBlank = 0b00000000; // all 7 segments and decimal pont blank

int SegmentArray[] = {Segment0, Segment1, Segment2, Segment3, Segment4, \
Segment5, Segment6, Segment7, Segment8, Segment9, AllBlank};

segmentByte = SegmentArray[alphaNumbericCharacter];

    for (segmentNumber = 0; segmentNumber < 8; segmentNumber++) // load 8 segment bits
    {
    segmentByte1 = segmentByte | (1 << segmentNumber);
    if (segmentByte1 == segmentByte)
    setGpioDataPinHigh01(portPinArrayPointerData);
    else
    setGpioDataPinLow01(portPinArrayPointerData);

        sendPositiveGoingPulse(portPinArrayPointerClock); // then write positive going pulse to latch data
    }
}

void displayDigitBlank(portPinArrayPointerArray sevenSegmentPortPinArrayPointerArray)
{
int DigitBlank = 10;
displayDigit0502(sevenSegmentPortPinArrayPointerArray, DigitBlank);
}

// ***********************************************************************
// End
// ***********************************************************************



// ***********************************************************************
// key050.h 2013oct15hkt1111
// ***********************************************************************

#include "config050.h"
#include "gpio050.h"
#include "timer050.h"

// *** Get key status ***

logicLevelValue getKeyStatus01(portPinArray keyPortPinArray)
{
logicLevelValue keyStatus;
int portNumber;
int pinNumber;
GPIO_TypeDef *gpioStructPointer;

portNumber = getPortNumber(keyPortPinArray);
gpioStructPointer = getGpioStructPointer(portNumber);
pinNumber = getPinNumber(keyPortPinArray);

keyStatus = getGpioDataPinValue01(gpioStructPointer, pinNumber);

return keyStatus;
}

logicLevelValue getKeyStatus(portPinArrayPointerArray keyPortPinArrayPointerArray, \
deviceNumber keyNumber)
{
logicLevelValue keyStatus;
int portNumber;
int pinNumber;
GPIO_TypeDef *gpio_struct_ptr;

keyStatus = getGpioDataPinValue(keyPortPinArrayPointerArray, keyNumber);

return keyStatus;
}

// *** Echo key by led ***

void echoKeyByLed02(portPinArray keyPortPinArray,  portPinArray ledPortPinArray)
{
int count;
logicLevelValue keyStatus;

keyStatus = HIGH;
while (keyStatus == HIGH)
{
keyStatus = getKeyStatus01(keyPortPinArray);
if (keyStatus == LOW)
{
// blinkLedP09TwoTimes();
   blink1Led02(ledPortPinArray, ONE_FIFTH_SECOND, ONE_HALF_SECOND, REPEAT_2_TIMES);
delayTime(TWO_SECONDS);
keyStatus = HIGH;
break;
}
}
}

void echo1KeyBySingleLed01(portPinArrayPointerArray keyPortPinArrayPointerArray, \
  deviceNumber keyNumber, \
  portPinArrayPointerArray ledPortPinArrayPointerArray, \
  deviceNumber ledNumber, int echoCount)
{
 int count;
 logicLevelValue keyStatus;

  for (count = 0; count < echoCount; count++)
 {
  delayTime(ONE_SECOND);

   keyStatus = HIGH;
  while (keyStatus == HIGH)
  {
   keyStatus = getKeyStatus(keyPortPinArrayPointerArray, keyNumber);

    if (keyStatus == LOW)
   {
    blink1Led(ledNumber);
    delayTime(TWO_SECONDS);
    keyStatus = HIGH;
    break;
   }
  }
 }
}

void echoOlimex1KeyBySingleLed01(portPinArrayPointerArray keyPortPinArrayPointerArray, \
  deviceNumber keyNumber, \
  portPinArrayPointerArray ledPortPinArrayPointerArray, \
  deviceNumber ledNumber, int echoCount)
{
 int count;
 logicLevelValue keyStatus;

  for (count = 0; count < echoCount; count++)
 {
  delayTime(ONE_SECOND);

   keyStatus = HIGH;
  while (keyStatus == HIGH)
  {
   keyStatus = getKeyStatus(keyPortPinArrayPointerArray, keyNumber);

    if (keyStatus == LOW)
   {
    blinkOlimex1Led(ledNumber);
    delayTime(TWO_SECONDS);
    keyStatus = HIGH;
    break;
   }
  }
 }
}

void echoOlimex1KeyBySingleLed4201(portPinArrayPointerArray keyPortPinArrayPointerArray, \
  deviceNumber keyNumber, \
  portPinArrayPointerArray ledPortPinArrayPointerArray, deviceNumber ledNumber)
{
int count;
logicLevelValue keyStatus;

delayTime(ONE_SECOND);

keyStatus = HIGH;
while (keyStatus == HIGH)
{
keyStatus = getKeyStatus(keyPortPinArrayPointerArray, keyNumber);
if (keyStatus == LOW)
{
blinkOneLed050(PortPinArrayP30, ON_ONE_HALF_SECOND, OFF_ONE_HALF_SECOND, \
     REPEAT_4_TIMES);
delayTime(TWO_SECONDS);
keyStatus = HIGH;
break;
}
}
}

/*
void echo1KeyBySingleLed(deviceNumber keyNumber, int ledNumber, int repeatCount)
{
 echo1KeyBySingleLed01(*WhutBoardKeyPortPinArrayPointerArray, keyNumber, \
    *WhutBoardLedPortPinArrayPointerArray, ledNumber, \
    repeatCount);
}
*/

void echoOlimex1KeyBySingleLed(deviceNumber keyNumber, int ledNumber, int repeatCount)
{
 echoOlimex1KeyBySingleLed01(*OlimexBoardKeyPortPinArrayPointerArray, keyNumber, \
    *OlimexBoardLedPortPinArrayPointerArray, ledNumber, \
    repeatCount);
}

void echoOlimex1KeyBySingleLed42(deviceNumber keyNumber, int ledNumber)
{
 echoOlimex1KeyBySingleLed4201(*OlimexBoardKeyPortPinArrayPointerArray, keyNumber, \
    *OlimexBoardLedPortPinArrayPointerArray, ledNumber);
}

void echoOlimex1KeyBySingleLed43(portPinArrayPointerArray keyPortPinArrayPointerArray, \
                        portPinArrayPointerArray ledPortPinArrayPointerArray, \
                        deviceNumber keyNumber, int ledNumber)
{
echoOlimex1KeyBySingleLed4201(keyPortPinArrayPointerArray, keyNumber, \
    ledPortPinArrayPointerArray, ledNumber);
}

// *** Echo key by 7 segment LED ***

void echoKeyBy7SegmentLed01(portPinArrayPointerArray keyPortPinArrayPointerArray, \
  deviceNumber keyNumber, \
  portPinArrayPointerArray sevenSegmentledPortPinArrayPointerArray, \
  int digitNumber, int echoCount)
{
 int count;
 logicLevelValue keyStatus;

  for (count = 0; count < echoCount; count++)
 {
  delayTime(ONE_SECOND);

   keyStatus = HIGH;
  while (keyStatus == HIGH)
  {
   keyStatus = getKeyStatus(keyPortPinArrayPointerArray, keyNumber);

    if (keyStatus == LOW)
   {
    blinkDigit(digitNumber, ONE_HALF_SECOND, ONE_HALF_SECOND, REPEAT_2_TIMES);
    // displayDigitBlank();
    delayTime(TWO_SECONDS);
    keyStatus = HIGH;
    break;
   }
  }
 }
}

/*
void echoKeyBy7SegmentLed(deviceNumber keyNumber, int digitNumber, int repeatCount)
{
 echoKeyBy7SegmentLed01(*WhutBoardKeyPortPinArrayPointerArray, keyNumber, \
    *WhutBoardSevenSegmentLedPortPinArrayPointerArray, digitNumber, \
    repeatCount);
}
*/

// ***********************************************************************
// Echo Key Tests
// ***********************************************************************

/*
void echoWakeUpKeyByLed() // Echo Wake Up Key 4 times
{
initializeAllInputPins(WhutBoardKeyPortPinArrayPointerArray, MAX_KEY_NUMBER);
echo1KeyBySingleLed(KEY_5, LED_5, REPEAT_4_TIMES);
}
*/

void echoOlimexWakeUpKeyByLed() // 2013oct11
{
initializeAllInputPins(OlimexBoardKeyPortPinArrayPointerArray, MAX_OLIMEX_KEY_PIN_NUMBER);
echoOlimex1KeyBySingleLed(KEY_2, LED_2, REPEAT_4_TIMES);
}

void echoWakeUpKey40() // ***** 2013oct12 *****
{
initializeAllInputPins40(OlimexBoardKeyPortPinArrayPointerArray);
echoOlimex1KeyBySingleLed(KEY_2, LED_2, REPEAT_4_TIMES);
}

void echoWakeUpKey41(portPinArrayPointerArray keyPortPinArrayPointerArray) // ***** 2013oct12 *****
{
initializeAllInputPins40(keyPortPinArrayPointerArray);
echoOlimex1KeyBySingleLed(KEY_2, LED_2, REPEAT_4_TIMES);
}

void echoKeyByLed42(portPinArrayPointerArray keyPortPinArrayPointerArray, int keyNumber, int ledNumber) // ***** 2013oct12 *****
{
initializeAllInputPins40(keyPortPinArrayPointerArray);
echoOlimex1KeyBySingleLed42(keyNumber, ledNumber);
}

void echoKeyByLed43(portPinArrayPointerArray keyPortPinArrayPointerArray, \
           portPinArrayPointerArray ledPortPinArrayPointerArray, \
           int keyNumber, int ledNumber) // ***** 2013oct12 *****
{
initializeAllInputPins40(keyPortPinArrayPointerArray);
echoOlimex1KeyBySingleLed43(keyPortPinArrayPointerArray, ledPortPinArrayPointerArray, keyNumber, ledNumber);
}

void echoKeyByLed45(mcuBoardStruct mcuBoardStruct, int keyNumber, int ledNumber)
{
initializeAllInputPins40(mcuBoardStruct.KeyPortPinArrayPointerArray);
echoOlimex1KeyBySingleLed43(mcuBoardStruct.KeyPortPinArrayPointerArray, \
                   mcuBoardStruct.LedPortPinArrayPointerArray, \
                   keyNumber, ledNumber);
}

void echoBootKeyThreeTimes() // Echo key by LED P0.9 MOSI
{
portPinArray ledPortPinArray  = {0, 9};
portPinArray bootPortPinArray = {0, 1};

initializeOutputPin01(ledPortPinArray);
initializeInputPin01(bootPortPinArray);

int count;

for (count = 0; count < 3; count++)
{
echoKeyByLed02(bootPortPinArray, ledPortPinArray);
}
}

void echoMisoKeyByMosiLedTwoTimes()
{
portPinArray mosiPortPinArray = {0, 9};
portPinArray misoPortPinArray = {0, 8};

initializeOutputPin01(mosiPortPinArray);
initializeInputPin01(misoPortPinArray);

int count;

for (count = 0; count < 2; count++)
{
echoKeyByLed02(misoPortPinArray, mosiPortPinArray);
}
}

/*
void echoAllKeysByLed() // Echo All keys twice
{
initializeAllInputPins(WhutBoardKeyPortPinArrayPointerArray, MAX_KEY_NUMBER);
echo1KeyBySingleLed(KEY_1, LED_1, REPEAT_2_TIMES);
echo1KeyBySingleLed(KEY_2, LED_2, REPEAT_2_TIMES);
echo1KeyBySingleLed(KEY_3, LED_3, REPEAT_2_TIMES);
echo1KeyBySingleLed(KEY_4, LED_4, REPEAT_2_TIMES);
echo1KeyBySingleLed(KEY_5, LED_5, REPEAT_2_TIMES);
}
*/

/*
void echoWakeUpKeyByDigit() // Echo Wake Up Key by digit
{
initializeAllOutputPins(WhutBoardSevenSegmentLedPortPinArrayPointerArray, \
MAX_7_SEG_LED_PIN_NUMBER);
echoKeyBy7SegmentLed(KEY_5, LED_5, REPEAT_2_TIMES);
}

void echoAllKeysByDigit() // Echo Wake Up Key by digit
{
initializeAllOutputPins(WhutBoardSevenSegmentLedPortPinArrayPointerArray, \
MAX_7_SEG_LED_PIN_NUMBER);
echoKeyBy7SegmentLed(KEY_1, LED_1, REPEAT_2_TIMES);
echoKeyBy7SegmentLed(KEY_2, LED_2, REPEAT_2_TIMES);
echoKeyBy7SegmentLed(KEY_3, LED_3, REPEAT_2_TIMES);
echoKeyBy7SegmentLed(KEY_4, LED_4, REPEAT_2_TIMES);
echoKeyBy7SegmentLed(KEY_5, LED_5, REPEAT_2_TIMES);
}

*/

// Version 050

void echoKeyByLed0504(mcuBoardStruct mcuBoardStruct, int keyNumber, int ledNUmber)
{
setupAllGpioPinsOutputLow050(mcuBoardStruct.LedPortPinArrayPointerArray,  MAX_OLIMEX_LED_PIN_NUMBER);
setupAllGpioPinsInput050(mcuBoardStruct.KeyPortPinArrayPointerArray,  MAX_OLIMEX_KEY_PIN_NUMBER);

echoKeyByLed050(mcuBoardStruct.KeyPortPinArrayPointerArray, \
       mcuBoardStruct.LedPortPinArrayPointerArray, \
       keyNumber, ledNUmber);
}

void echoKeyByLed0505(mcuBoardStruct mcuBoardStruct, int keyNumber, int ledNUmber)
{
setupAllGpioPinsOutputLow050(mcuBoardStruct.LedPortPinArrayPointerArray,  mcuBoardStruct.maxLedPinNumber);
setupAllGpioPinsInput050(mcuBoardStruct.KeyPortPinArrayPointerArray,  mcuBoardStruct.maxKeyPinNumber);

echoKeyByLed050(mcuBoardStruct.KeyPortPinArrayPointerArray, \
       mcuBoardStruct.LedPortPinArrayPointerArray, \
       keyNumber, ledNUmber);
}

void echoKeyByLed050(portPinArrayPointerArray keyPortPinArrayPointerArray, \
            portPinArrayPointerArray ledPortPinArrayPointerArray, \
            int keyNumber, int ledNumber)
{
int count;
logicLevelValue keyStatus;

delayTime(ONE_HALF_SECOND);

keyStatus = HIGH;
while (keyStatus == HIGH)
{
keyStatus = getKeyStatus(keyPortPinArrayPointerArray, keyNumber);
if (keyStatus == LOW)
{
blinkOneLed0501(ledPortPinArrayPointerArray, ledNumber, \
       ON_ONE_FIFTH_SECOND, OFF_ONE_HALF_SECOND, REPEAT_2_TIMES);
delayTime(TWO_SECONDS);
keyStatus = HIGH;
break;
}
}
}

void echoWhutKeyByLed(int keyNumber, int ledNUmber)
{
setupAllGpioPinsOutputLow050(WhutBoardLedPortPinArrayPointerArray, MAX_WHUT_LED_PIN_NUMBER);
setupAllGpioPinsInput050(WhutBoardKeyPortPinArrayPointerArray,  MAX_WHUT_KEY_PIN_NUMBER);

echoKeyByLed050(WhutBoardKeyPortPinArrayPointerArray, WhutBoardLedPortPinArrayPointerArray, \
       keyNumber, ledNUmber);
}

// ***********************************************************************
// End
// ***********************************************************************


// ***********************************************************************
// config050.h - 2013oct15hk1107
// ***********************************************************************

#include "lpc11xx_syscon.h"
#include "lpc11xx_gpio.h"
#include "lpc11xx_iocon.h"

#ifndef CONFIG_HEADER_SEEN
#define CONFIG_HEADER_SEEN

// *** Logic level ***

#define LOW 0
#define HIGH 1

#define LOW_LEVEL 0
#define HIGH_LEVEL 1

#define LOGIC_LOW_LEVEL 0
#define LOGIC_HIGH_LEVEL 1

typedef int logicLevelValue;

logicLevelValue LogicLevelLow = 0;
logicLevelValue LogicLevelHigh = 1;

// *** GPIO direction ***

#define INPUT_DIRECTION 0
#define OUTPUT_DIRECTION 1

typedef int directionValue;

directionValue InputDirection = 0;
directionValue OutputDirection = 1;

// *** GPIO port number, pin number, port/pin number ***

#define PORT0 0
#define PORT1 1
#define PORT2 2
#define PORT3 3

#define PIN0 0
#define PIN1 1
#define PIN2 2
#define PIN3 3
#define PIN4 4
#define PIN5 5
#define PIN6 6
#define PIN7 7
#define PIN8 8
#define PIN9 9
#define PIN10 10
#define PIN11 11

typedef int portNumber;
portNumber Port0 = 0;
portNumber Port1 = 1;
portNumber Port2 = 2;
portNumber Port3 = 3;

typedef int pinNumber;
pinNumber Pin0  =  0;
pinNumber Pin1  =  1;
pinNumber Pin2  =  2;
pinNumber Pin3  =  3;
pinNumber Pin4  =  4;
pinNumber Pin5  =  5;
pinNumber Pin6  =  6;
pinNumber Pin7  =  7;
pinNumber Pin8  =  8;
pinNumber Pin9  =  9;
pinNumber Pin10 = 10;
pinNumber Pin11 = 11;

typedef const int portPinNumber;

portPinNumber Pio05  = 5;
portPinNumber Pio08  = 8;
portPinNumber Pio09  = 9;

portPinNumber Rpio11 = 11;
portPinNumber Rpio12 = 12;
portPinNumber Pio19  = 19;
portPinNumber Rpio18 = 18;
portPinNumber Pio110  = 110;

// *** LED, key, 7-segment LED digit number ***

typedef const int deviceNumber;

#define LED1 1
#define LED2 2
#define LED3 3
#define LED4 4
#define LED5 5
#define LED6 6
#define LED7 7
#define LED8 8

#define LED_1 1
#define LED_2 2
#define LED_3 3
#define LED_4 4
#define LED_5 5
#define LED_6 6
#define LED_7 7
#define LED_8 8

#define KEY_1 1
#define KEY_2 2
#define KEY_3 3
#define KEY_4 4
#define KEY_5 5

#define MAX_DEVICE_NUMBER 5
#define MAX_LED_NUMBER    5
#define MAX_KEY_NUMBER    5
#define MAX_PWM_NUMBER    5

#define DIGIT_0 0
#define DIGIT_1 1
#define DIGIT_2 2
#define DIGIT_3 3
#define DIGIT_4 4
#define DIGIT_5 5
#define DIGIT_6 6
#define DIGIT_7 7
#define DIGIT_8 8
#define DIGIT_9 9
#define DIGIT_10 10
#define DIGIT_BLANK 10

// *** Port pin array and port pin array pinters ***

#define PORT_INDEX 0
#define PIN_INDEX 1

typedef int portPinArray[2];

typedef portPinArray *portPinArrayPointerArray[MAX_DEVICE_NUMBER];

// *** Mcu board struct ***

/*
typedef struct
 {
portPinArrayPointerArray *LedPortPinArrayPointerArray;
portPinArrayPointerArray *KeyPortPinArrayPointerArray;
 } mcuBoardStruct;
*/

 typedef struct
  {
  portPinArrayPointerArray *LedPortPinArrayPointerArray;
  portPinArrayPointerArray *KeyPortPinArrayPointerArray;
  int maxLedPinNumber;
  int maxKeyPinNumber;
  } mcuBoardStruct;

// *** Generic port pin array ***

portPinArray PortPinArrayP04 = {PORT0, PIN4};
portPinArray PortPinArrayP05 = {PORT0, PIN5};
portPinArray PortPinArrayP09 = {PORT0, PIN9};
portPinArray PortPinArrayP14 = {PORT1, PIN4}; // KEY2
portPinArray PortPinArrayP24 = {PORT2, PIN4};
portPinArray PortPinArrayP25 = {PORT2, PIN5}; // USB D- do NOT use
portPinArray PortPinArrayP26 = {PORT2, PIN6}; // USB D+ do NOT use
portPinArray PortPinArrayP27 = {PORT2, PIN7};
portPinArray PortPinArrayP29 = {PORT2, PIN9}; // KEY1
portPinArray PortPinArrayP30 = {PORT3, PIN0}; // LED1
portPinArray PortPinArrayP34 = {PORT3, PIN4}; // replacing P24
portPinArray PortPinArrayP35 = {PORT3, PIN5}; // replacing P25

portPinArray PortPinArrayP108 = {PORT1, PIN8};  // Wuht LED1
portPinArray PortPinArrayP109 = {PORT1, PIN9};  // Wuht LED2
portPinArray PortPinArrayP110 = {PORT1, PIN10}; // Wuht LED3
portPinArray PortPinArrayP111 = {PORT1, PIN11}; // Wuht LED4

portPinArray PortPinArrayP208 = {PORT2, PIN8};
portPinArray PortPinArrayP209 = {PORT2, PIN9};
portPinArray PortPinArrayP210 = {PORT2, PIN10};
portPinArray PortPinArrayP211 = {PORT2, PIN11};

// *** Olimex LED port pin array ***

#define MAX_OLIMEX_LED_PIN_NUMBER 8 // 2013oct11

#define SERIAL_CLOCK_INDEX 0
#define SERIAL_DATA_IN_INDEX 1
#define PARALLEL_DATA_OUTPUT_LATCH_INDEX 2
#define OUTPUT_ENABLE_INDEX 3

int SizeOfPortPinArrayPointer = sizeof(PortPinArrayP04);

portPinArray OlimexBoardLedPortPinArray1 = {PORT3, PIN0}; // LED 0 2013oct11
portPinArray OlimexBoardLedPortPinArray2 = {PORT3, PIN1}; // LED 1 2013oct11
portPinArray OlimexBoardLedPortPinArray3 = {PORT3, PIN2}; // LED 2 2013oct11
portPinArray OlimexBoardLedPortPinArray4 = {PORT3, PIN3}; // LED 3 2013oct11
portPinArray OlimexBoardLedPortPinArray5 = {PORT3, PIN4}; // LED 4 2013oct11
portPinArray OlimexBoardLedPortPinArray6 = {PORT3, PIN5}; // LED 5 2013oct11
portPinArray OlimexBoardLedPortPinArray7 = {PORT2, PIN6}; // LED 6 2013oct11
portPinArray OlimexBoardLedPortPinArray8 = {PORT2, PIN7}; // LED 7 2013oct11

portPinArrayPointerArray OlimexBoardLedPortPinArrayPointerArray[MAX_OLIMEX_LED_PIN_NUMBER] = \
  {&OlimexBoardLedPortPinArray1, &OlimexBoardLedPortPinArray2, \
  &OlimexBoardLedPortPinArray3, &OlimexBoardLedPortPinArray4, \
  &OlimexBoardLedPortPinArray5, &OlimexBoardLedPortPinArray6, \
  &OlimexBoardLedPortPinArray7, &OlimexBoardLedPortPinArray8};

// *** Olimex Key port pin array ***

#define MAX_OLIMEX_KEY_PIN_NUMBER 2

portPinArray OlimexBoardKeyPortPinArray1 = {PORT2, PIN9};
portPinArray OlimexBoardKeyPortPinArray2 = {PORT1, PIN4};

portPinArrayPointerArray OlimexBoardKeyPortPinArrayPointerArray[MAX_OLIMEX_KEY_PIN_NUMBER] = \
    {&OlimexBoardKeyPortPinArray1, &OlimexBoardKeyPortPinArray2};

// *** Olimex LPC1114 Board Struct ***

mcuBoardStruct OlimexLpc1114DevBoardStruct = {OlimexBoardLedPortPinArrayPointerArray, \
OlimexBoardKeyPortPinArrayPointerArray};

// *** Whut LPC11c14 Dev Board ***

#define MAX_WHUT_LED_PIN_NUMBER 5

portPinArray WhutBoardLedPortPinArray1 = {PORT1, PIN8};  // LED D1
portPinArray WhutBoardLedPortPinArray2 = {PORT1, PIN9};  // LED D2
portPinArray WhutBoardLedPortPinArray3 = {PORT1, PIN10}; // LED D3
portPinArray WhutBoardLedPortPinArray4 = {PORT1, PIN11}; // LED D4
portPinArray WhutBoardLedPortPinArray5 = {PORT0, PIN9};  // JTAG pin13

portPinArrayPointerArray WhutBoardLedPortPinArrayPointerArray[MAX_WHUT_LED_PIN_NUMBER] = \
  {&WhutBoardLedPortPinArray1, &WhutBoardLedPortPinArray2, \
  &WhutBoardLedPortPinArray3, &WhutBoardLedPortPinArray4, \
  &WhutBoardLedPortPinArray5};

#define MAX_WHUT_KEY_PIN_NUMBER 2

portPinArray WhutBoardKeyPortPinArray1 = {PORT0, PIN1}; // ISP Boot key
portPinArray WhutBoardKeyPortPinArray2 = {PORT1, PIN4}; // Wakeup key

portPinArrayPointerArray WhutBoardKeyPortPinArrayPointerArray[MAX_WHUT_KEY_PIN_NUMBER] = \
    {&WhutBoardKeyPortPinArray1, &WhutBoardKeyPortPinArray2};

mcuBoardStruct WhutLpc11c14DevBoardStruct = {WhutBoardLedPortPinArrayPointerArray, \
WhutBoardKeyPortPinArrayPointerArray, MAX_WHUT_LED_PIN_NUMBER, MAX_WHUT_KEY_PIN_NUMBER};

// *** Whut 7 Segment LED configuration ***

#define SCLK_INDEX 0
#define DIN_INDEX 1
#define LATCH_INDEX 2

#define MAX_WHUT_7_SEG_LED_PIN_NUMBER 3
#define MAX_7_SEG_LED_PIN_NUMBER 3

portPinArray WhutBoardSevenSegmentLedPortPinArraySclk = {PORT2, PIN1}; // Serial Clock
portPinArray WhutBoardSevenSegmentLedPortPinArrayDin = {PORT2, PIN3}; // Data in
portPinArray WhutBoardSevenSegmentLedPortPinArrayLatch = {PORT2, PIN0}; // Latch

portPinArrayPointerArray WhutBoardSevenSegmentLedPortPinArrayPointerArray[MAX_WHUT_7_SEG_LED_PIN_NUMBER] = \
  {&WhutBoardSevenSegmentLedPortPinArraySclk, &WhutBoardSevenSegmentLedPortPinArrayDin, \
       &WhutBoardSevenSegmentLedPortPinArrayLatch};

// *** Olimex 7 Segment LED configuration ***

#define MAX_OLIMEX_7_SEG_LED_PIN_NUMBER 3

portPinArray OlimexBoardSevenSegmentLedPortPinArraySclk = {PORT2, PIN8}; // Serial Clock
portPinArray OlimexBoardSevenSegmentLedPortPinArrayDin = {PORT2, PIN9}; // Data in
portPinArray OlimexBoardSevenSegmentLedPortPinArrayLatch = {PORT2, PIN10}; // Latch

portPinArrayPointerArray OlimexBoardSevenSegmentLedPortPinArrayPointerArray[MAX_OLIMEX_7_SEG_LED_PIN_NUMBER] = \
  {&OlimexBoardSevenSegmentLedPortPinArraySclk, &OlimexBoardSevenSegmentLedPortPinArrayDin, \
       &OlimexBoardSevenSegmentLedPortPinArrayLatch};

#endif /* CONFIG_HEADER_SEEN */

// ***********************************************************************
// * End *
// ***********************************************************************



// ***********************************************************************
// gpio050.h 2013oct15hkt1108
// ***********************************************************************

#ifndef GPIO050_HEADER_SEEN
#define GPIO050_HEADER_SEEN

#include "lpc11xx_syscon.h"
#include "lpc11xx_gpio.h"
#include "lpc11xx_iocon.h"
#include "config050.h"
#include "timer050.h"

// *** GPIO struct pointer ***

typedef GPIO_TypeDef *gpioStructPointerArray[4];
gpioStructPointerArray CmsisGpioStructPointerArray = {LPC_GPIO0, LPC_GPIO1, LPC_GPIO2, LPC_GPIO3};

GPIO_TypeDef *getGpioStructPointer(int portNumber)
{
 GPIO_TypeDef *gpioStructPointer;
 gpioStructPointer =  CmsisGpioStructPointerArray[portNumber];
 return gpioStructPointer;
}

typedef struct
{
 GPIO_TypeDef *GpioStructPointer;
 int PinNumber;
} gpioPortStructPinStruct;

gpioPortStructPinStruct *getGpioPortStructPinStructPointer(portNumber portNumber, \
pinNumber pinNumber) // *** To be tested ***
  {
 gpioPortStructPinStruct *gpioPortStructPinStruct;
 gpioPortStructPinStruct->GpioStructPointer = getGpioStructPointer(portNumber);
 gpioPortStructPinStruct->PinNumber = pinNumber;
 return gpioPortStructPinStruct;
  }

// *** GPIO functions ***

void setGpioDataPinInput(GPIO_TypeDef *gpio_struct_ptr, int pinNumber)
{
 gpio_struct_ptr->DIR  &= ~(1 << pinNumber);
}

void setGpioDataPinOutput(GPIO_TypeDef *gpio_struct_ptr, int pinNumber)
{
 gpio_struct_ptr->DIR |= (1 << pinNumber);
}

void setGpioDataPinLow(GPIO_TypeDef *gpio_struct_ptr, int pinNumber)
{
 gpio_struct_ptr->DATA &= ~(1 << pinNumber);
}

void setGpioDataPinHigh(GPIO_TypeDef *gpio_struct_ptr, int pinNumber)
{
 gpio_struct_ptr->DATA |= (1 << pinNumber);
}

void setGpioPinDirection(GPIO_TypeDef *gpio_struct_ptr, int pinNumber, directionValue directionValue)
{
 if (directionValue == INPUT_DIRECTION)
  setGpioDataPinInput(gpio_struct_ptr, pinNumber);
 else
  setGpioDataPinOutput(gpio_struct_ptr, pinNumber);
}

void setGpioDataPin(GPIO_TypeDef *gpio_struct_ptr, int pinNumber, logicLevelValue logicLevelValue)
{
 if (logicLevelValue == LOGIC_LOW_LEVEL)
  setGpioDataPinLow(gpio_struct_ptr, pinNumber);
 else
  setGpioDataPinHigh(gpio_struct_ptr, pinNumber);
}

logicLevelValue getGpioDataPinValue01(GPIO_TypeDef *gpio_struct_ptr, int pinNumber)
{
 logicLevelValue logicLevelValue;

  int GpioDataPinMask = (1 << pinNumber);

  if ((gpio_struct_ptr->DATA  &= GpioDataPinMask) == GpioDataPinMask)
  logicLevelValue = HIGH;
 else
  logicLevelValue = LOW;

  return logicLevelValue;
}

logicLevelValue getGpioDataPinValue(portPinArrayPointerArray inputPortPinArrayPointerArray, int pinNumber)
{
 int portNumber;
 GPIO_TypeDef *gpioStructPointer;
 logicLevelValue logicLevelValue;

  portNumber = getPortNumber01(inputPortPinArrayPointerArray, pinNumber);
 gpioStructPointer = getGpioStructPointer(portNumber);
 pinNumber = getPinNumber01(inputPortPinArrayPointerArray, pinNumber);

  logicLevelValue = getGpioDataPinValue01(gpioStructPointer, pinNumber);

  return logicLevelValue;
}

portNumber getPortNumber(portPinArray portPinArray)
{
 int portNumber;
 portNumber = portPinArray[PORT_INDEX];
 return portNumber;
}

portNumber getPortNumber01(portPinArrayPointerArray portPinArrayPointerArray, deviceNumber deviceNumber)
{
 int portNumber;
 portNumber = getPortNumber(*portPinArrayPointerArray[deviceNumber - 1]);
 return portNumber;
}

pinNumber getPinNumber(portPinArray portPinArray)
{
 int pinNumber;
 pinNumber = portPinArray[PIN_INDEX];
 return pinNumber;
}

pinNumber getPinNumber01(portPinArrayPointerArray portPinArrayPointerArray, deviceNumber deviceNumber)
{
 int pinNumber;
 pinNumber = getPinNumber(*portPinArrayPointerArray[deviceNumber - 1]);
 return pinNumber;
}

// *** set up output pin ***

void initializeOutputPin01(portPinArray portPinArray)
{
int portNumber;
int pinNumber;
GPIO_TypeDef *gpioStructPointer;

portNumber = getPortNumber(portPinArray);
gpioStructPointer = getGpioStructPointer(portNumber);
pinNumber = getPinNumber(portPinArray);

setGpioDataPinOutput(gpioStructPointer, pinNumber);
setGpioDataPinLow (gpioStructPointer, pinNumber);
  }

void initializeOutputPin01High(portPinArray portPinArray)
{
int portNumber;
int pinNumber;
GPIO_TypeDef *gpioStructPointer;

portNumber = getPortNumber(portPinArray);
gpioStructPointer = getGpioStructPointer(portNumber);
pinNumber = getPinNumber(portPinArray);

setGpioDataPinOutput(gpioStructPointer, pinNumber);
setGpioDataPinHigh(gpioStructPointer, pinNumber);
  }

void initializeOutputPin01Low(portPinArray portPinArray)
{
int portNumber;
int pinNumber;
GPIO_TypeDef *gpioStructPointer;

portNumber = getPortNumber(portPinArray);
gpioStructPointer = getGpioStructPointer(portNumber);
pinNumber = getPinNumber(portPinArray);

setGpioDataPinOutput(gpioStructPointer, pinNumber);
setGpioDataPinLow(gpioStructPointer, pinNumber);
  }

void initializeOneOutputPin(portPinArrayPointerArray outputPortPinArrayPointerArray, deviceNumber deviceNumber)
{
int portNumber;
int pinNumber;
portPinArray portPinArray = {0, 0};

portNumber = getPortNumber01(outputPortPinArrayPointerArray, deviceNumber);
pinNumber = getPinNumber01(outputPortPinArrayPointerArray, deviceNumber);

portPinArray[PORT_INDEX] = portNumber;
portPinArray[PIN_INDEX] = pinNumber;
initializeOutputPin01(portPinArray);

}

void initializeOneOutputPinHigh(portPinArrayPointerArray outputPortPinArrayPointerArray, deviceNumber deviceNumber)
{
int portNumber;
int pinNumber;
portPinArray portPinArray = {0, 0};

portNumber = getPortNumber01(outputPortPinArrayPointerArray, deviceNumber);
pinNumber = getPinNumber01(outputPortPinArrayPointerArray, deviceNumber);

portPinArray[PORT_INDEX] = portNumber;
portPinArray[PIN_INDEX] = pinNumber;
initializeOutputPin01High(portPinArray);
}

void initializeAllOutputPins(portPinArrayPointerArray outputPortPinArrayPointerArray, int maxPinNumber)
{
  int pinNumber;

  for (pinNumber = 1; pinNumber < (maxPinNumber + 1); pinNumber++)
  {
   initializeOneOutputPin(outputPortPinArrayPointerArray, pinNumber);
  }
}

void initializeAllOutputPinsHigh(portPinArrayPointerArray outputPortPinArrayPointerArray, int maxPinNumber)
{
  int pinNumber;

  for (pinNumber = 1; pinNumber < (maxPinNumber + 1); pinNumber++)
  {
   initializeOneOutputPinHigh(outputPortPinArrayPointerArray, pinNumber);
  }
}

// *** setup input pin ***

void initializeInputPin01(portPinArray portPinArray)
{
int portNumber;
int pinNumber;
GPIO_TypeDef *gpioStructPointer;

portNumber = getPortNumber(portPinArray);
gpioStructPointer = getGpioStructPointer(portNumber);
pinNumber = getPinNumber(portPinArray);

setGpioDataPinInput(gpioStructPointer, pinNumber);
}

void initializeOneInputPin(portPinArrayPointerArray outputPortPinArrayPointerArray, \
  deviceNumber deviceNumber)
{
 int portNumber;
 int pinNumber;
 GPIO_TypeDef *gpioStructPointer;

 portNumber = getPortNumber01(outputPortPinArrayPointerArray, deviceNumber);
 gpioStructPointer = getGpioStructPointer(portNumber);
 pinNumber = getPinNumber01(outputPortPinArrayPointerArray, deviceNumber);

  setGpioDataPinInput(gpioStructPointer, pinNumber);
  }

void initializeAllInputPins(portPinArrayPointerArray inputPortPinArrayPointerArray, int maxPinNumber)
{
  int pinNumber;

  for (pinNumber = 1; pinNumber < (maxPinNumber + 1); pinNumber++)
  {
   initializeOneInputPin(inputPortPinArrayPointerArray, pinNumber);
  }
}

void initializeAllInputPins40(portPinArrayPointerArray inputPortPinArrayPointerArray)
{
int pinNumber;
int maxPinNumber;

maxPinNumber = sizeof(inputPortPinArrayPointerArray) / sizeof(*inputPortPinArrayPointerArray);

for (pinNumber = 1; pinNumber < (maxPinNumber + 1); pinNumber++)
{
initializeOneInputPin(inputPortPinArrayPointerArray, pinNumber);
}
}

// *** Set GPIO output pin data value ***

void setGpioDataPinHigh01(portPinArray *portPinArrayPointer)
{
pinNumber pinNumber;
portNumber portNumber;
GPIO_TypeDef *gpioStructPointer;

pinNumber = getPinNumber(portPinArrayPointer);
portNumber = getPortNumber(portPinArrayPointer);
gpioStructPointer = getGpioStructPointer(portNumber);
setGpioDataPinHigh(gpioStructPointer, pinNumber);
}

void setGpioDataPinLow01(portPinArray *portPinArrayPointer)
{
pinNumber pinNumber;
portNumber portNumber;
GPIO_TypeDef *gpioStructPointer;

pinNumber = getPinNumber(portPinArrayPointer);
portNumber = getPortNumber(portPinArrayPointer);
gpioStructPointer = getGpioStructPointer(portNumber);
setGpioDataPinLow(gpioStructPointer, pinNumber);
}

// *** Functions 050 ***

void setupGpioPinOutputLow050(portPinArray portPinArray)
{
int portNumber;
int pinNumber;
GPIO_TypeDef *gpioStructPointer;

portNumber = getPortNumber(portPinArray);
gpioStructPointer = getGpioStructPointer(portNumber);
pinNumber = getPinNumber(portPinArray);

setupGpioPinOutput051(gpioStructPointer, pinNumber);
setGpioOutputPinLow051(gpioStructPointer, pinNumber);
  }

void setupGpioPinOutput051(GPIO_TypeDef *gpio_struct_ptr, int pinNumber)
{
 gpio_struct_ptr->DIR |= (1 << pinNumber);
}

void setGpioOutputPinHigh051(GPIO_TypeDef *gpio_struct_ptr, int pinNumber)
{
 gpio_struct_ptr->DATA |= (1 << pinNumber);
}

void setGpioOutputPinLow051(GPIO_TypeDef *gpio_struct_ptr, int pinNumber)
{
 gpio_struct_ptr->DATA &= ~(1 << pinNumber);
}

void setupAllGpioPinsOutputLow050(portPinArrayPointerArray portPinArrayPointerArray, int maxPinNumber)
{
  int pinNumber;

  for (pinNumber = 1; pinNumber < (maxPinNumber + 1); pinNumber++)
  {
   setupPinOutputLow050(portPinArrayPointerArray, pinNumber);
  }
}

void setupPinOutputLow050(portPinArrayPointerArray outputPortPinArrayPointerArray, deviceNumber deviceNumber)
{
int portNumber;
int pinNumber;
portPinArray portPinArray = {0, 0};

portNumber = getPortNumber01(outputPortPinArrayPointerArray, deviceNumber);
pinNumber = getPinNumber01(outputPortPinArrayPointerArray, deviceNumber);

portPinArray[PORT_INDEX] = portNumber;
portPinArray[PIN_INDEX] = pinNumber;
initializeOutputPin01Low(portPinArray);
}

void setupGpioPinInput050(portPinArray portPinArray)
{
int portNumber;
int pinNumber;
GPIO_TypeDef *gpioStructPointer;

portNumber = getPortNumber(portPinArray);
gpioStructPointer = getGpioStructPointer(portNumber);
pinNumber = getPinNumber(portPinArray);

setGpioDataPinInput(gpioStructPointer, pinNumber);
}

void setupAllGpioPinsInput050(portPinArrayPointerArray portPinArrayPointerArray, int maxPinNumber)
{
  int pinNumber;

  for (pinNumber = 1; pinNumber < (maxPinNumber + 1); pinNumber++)
  {
 setupGpioPinInput051(portPinArrayPointerArray, pinNumber);
  }
}

void setupGpioPinInput051(portPinArrayPointerArray outputPortPinArrayPointerArray, \
 deviceNumber deviceNumber)
{
int portNumber;
int pinNumber;
GPIO_TypeDef *gpioStructPointer;

portNumber = getPortNumber01(outputPortPinArrayPointerArray, deviceNumber);
gpioStructPointer = getGpioStructPointer(portNumber);
pinNumber = getPinNumber01(outputPortPinArrayPointerArray, deviceNumber);

setGpioDataPinInput(gpioStructPointer, pinNumber);
  }

void setupOlimexGpio050()
{
setupAllGpioPinsOutputLow050(OlimexBoardLedPortPinArrayPointerArray, MAX_OLIMEX_LED_PIN_NUMBER);
setupAllGpioPinsInput050(OlimexBoardKeyPortPinArrayPointerArray,  MAX_OLIMEX_KEY_PIN_NUMBER);
}

void setupWhutGpio050()
{
setupAllGpioPinsOutputLow050(WhutBoardLedPortPinArrayPointerArray, MAX_WHUT_LED_PIN_NUMBER);
setupAllGpioPinsInput050(WhutBoardKeyPortPinArrayPointerArray,  MAX_WHUT_KEY_PIN_NUMBER);
}

#endif /* GPIO050_HEADER_SEEN */

// ***********************************************************************
// End
// ***********************************************************************



// ***********************************************************************
// timer050.h 2013oct15hkt1109
// ***********************************************************************

#ifndef DELAY_HEADER_SEEN
#define DELAY_HEADER_SEEN

// *** Delay constants ***

#define ONE_FIFTH_SECOND  2
#define ONE_HALF_SECOND   5
#define ONE_SECOND       10
#define TWO_SECONDS      20

#define ON_ONE_FIFTH_SECOND   2
#define OFF_ONE_FIFTH_SECOND  2
#define ON_ONE_HALF_SECOND    5
#define OFF_ONE_HALF_SECOND   5
#define ON_ONE_SECOND        10
#define OFF_ONE_SECOND       10

// *** Repeat times ***

#define REPEAT_1_TIME 1
#define REPEAT_2_TIMES 2
#define REPEAT_3_TIMES 3
#define REPEAT_4_TIMES 4
#define REPEAT_5_TIMES 5
#define REPEAT_6_TIMES 6
#define REPEAT_8_TIMES 8
#define REPEAT_10_TIMES 10
#define REPEAT_20_TIMES 20

#define BLINK_0_TIME 0
#define BLINK_1_TIME 1
#define BLINK_2_TIMES 2
#define SEQUENCE_1_TIME 1
#define SEQUENCE_2_TIMES 2
#define SEQUENCE_4_TIMES 4

void delayTenthSecond(int count)
{
 int i, j, k;
 for (i = 0; i < count; i++)
 {
  for (j = 0; j < 0x4; j++)
     {
         for (k = 0; k < 0x000BB00; k++)
         {
         }
     }
 }
}

void delayTime(int count)
{
 delayTenthSecond(count);
}

// *** system timer number, match register number ***

typedef const int timerNumber;
timerNumber Ct16b0 = 0;
timerNumber Ct16b1 = 1;
timerNumber Ct32b0 = 2;
timerNumber Ct32b1 = 3;

typedef const int matchRegisterNumber;
matchRegisterNumber MatchRegister0 = 0;
matchRegisterNumber MatchRegister1 = 1;
matchRegisterNumber MatchRegister2 = 2;

#endif /* DELAY_HEADER_SEEN */

// ***********************************************************************
// * End *
// ***********************************************************************